Click-Stand
The Only Folding Portable Kickstand
Ho
w to measure for your Click-Stand:You will need to take two measurements of your bike before you purchase your Click-Stand:
First, with your bike standing upright (vertical), measure from the bottom of the top tube straight down to the ground. Typically the Click-Stand supports your bike where the bottom of the top tube meets the seat tube. Round your measurement off to the nearest quarter inch.
Be sure that your bike is standing upright, not leaning, then measure straight down to the ground. (Do not lean your bike & guess where the Click-Stand will touch the ground.)
This isn't the easiest thing to do as the chainstays get in your way. Just measure as carefully as you can, more than once please. I will determine the length of the Click-Stand from that measurement.
Second, measure the diameter of your top tube. Either eyeball it with a ruler, use a caliper, or measure around it with a piece of string, then divide the string's length by 3.14 (just like your math teacher taught you!)
Order the cradle that matches you top tube diameter, or the larger size if you are in between.
The standard cradle fits 1" and 1 1/8" top tubes. Oversized cradles to fit 1 1/4", 1 3/8", 1 1/2", 1 5/8", 1 3/4", and 1 7/8" are available for a slight charge.
You will be prompted for these two measurements when you place an order. If you have any questions about taking the measurements, please contact me at:
info@click-stand.com
Brake-Bands:One, or both, of your brakes must be engaged while using a Click-Stand. Brake-Bands are included with your order, one for each lever, and a spare. Slip them over your handlebar, pull the tab over your brake lever to hold it shut. Brake-Bands are included with your purchase.
When not in use your Brake-Bands just cling to your handlebar waiting for their next chance to serve.
If you have bar-end shifters, let me know and your Brake-Bands will be shipped unassembled. You will need to fit them over your cables and snap them together.
At the right is a picture of bar-end shifters. They are fitted to the ends of drop handlebars.
Click-Stand is not to be used on a bike with a mounted child seat.