Click-Stand
The Only Folding Portable Kickstand
The Click-Stand Max
The Max is made from 11mm aluminum tubing, and comes in four, five or six segments. The Max is intended for tandems, loaded touring bikes, bikes with trailers, long wheel-base recumbents, and utility bikes. If you intend to use panniers, or load your bike, get a Max. There is no tested weight limit; I think that if you are willing to pedal it down the road, a Max will hold it up!
Brake-Bands are included.
Black Max-4 ~ $31
Black Max-5 ~ $35
Black Max-6 ~ $39
Colors add $3
The Click-Stand MiniThe Mini is made from 9.5mm aircraft grade 7000 series aluminum tubing and comes in four, five or six segments. A Mini will support any bike until you start adding front or rear panniers. Handlebar bags and rack bags are fine. Choose the Mini-4, Mini-5, or Mini-6 based on where you will carry it. Brake-Bands are included.
Black Mini-4 ~ $31
Black Mini-5 ~ $35
Black Mini-6 ~ $39
Colors add $3
Please Note: Until further notice all black Mini-4 Click-Stands will be made from .380" tubing. Don't worry, you will never know the difference.
The Original Click-Stand Mini ~ I have enough tubing to make another 40 Original Mini-6 Click-Stand. They are made from .340" Easton aluminum tubing The Original Mini was created for cyclists who don't ride with larger bags. They fit best in a jersey pocket. Get one of these, while they last, if you have a light road bike and want to save a few dollars.
They will not support the weight of a bike with bags like the new Mini.
~ Mini-6 ~
Extra Brake-Bands ~ Brake-Bands are a must when using a Click-Stand, and they are included with your purchase of any Click-Stand. Typically they cling to the handlebar when not in use, so they are hard to loose. However...............if you misplaced yours, here they are, a set of three.
~ $5 ~ Includes 1st Class shipping.
~ $3 ~ When ordering a Click-Stand at the same time. Remember, three Brake-Bands are already included with the order of any Click-Stand.
Center-Bracket ~ The Center-Bracket is a great solution for carrying your Click-Stand when you don't have a bag to tote it in. It can be mounted to your bike in two ways. It can be bolted on in place of a water bottle, or it can be zip tied to any free space on a tube. It comes with mounting bolts & zip ties. I do think that if you do zip tie it to your frame it will eventually mark your paint.
~ $10 ~ Includes 1st Class postage.
~ $8 ~ If purchased with a Click-Stand.
Return to "About Click-Stand Page"
Side Bracket ~ This is a handy way to carry your Click-Stand if you don't have a bag to hold it. This is a resized Topeak Mini-pump bracket which securely holds your Click-Stand with a Velcro strip. Attaches under your water bottle cage. ~ $9 ~ Includes 1st Class shipping.
~ $7 ~ If purchased with a Click-Stand.
Return To "About Click-Stand Page"
Fat-Foot ~ Fits only a Max Click-Stand. Helps to keep the foot from sinking into soft soil. Most helpful for loaded touring bikes particularly when camping. Buy more than one if you are leaving on a long tour.
Comes with the inside lightly coated with Vaseline; reapplied occasionally to help with removal.
~ $3 ~ Includes 1st Class shipping.
~ $2 ~ If purchased with a Click-Stand.
Comes with the inside lightly coated with Vaseline; reapplied occasionally to help with removal.
~ $3 ~ Includes 1st Class shipping.
~ $2 ~ If purchased with a Click-Stand.